Cisco Systems Cisco MGX 8850 2-38, Example screens of a user changing the password when password expiration check is On:

2-38
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter2 Shelf Management Commands
cnfuser
Example
Change the password and privil ege lever of user “rocky.” New password is “nevermind,” and the
privilege level is GROUP1. Note that th e you must be logged in at a h igher than GROUP1 privilege level
to specify GROUP1 for “rocky.” If the “-u” and userID (rocky) were not entered, this command would
change the password and privilege of the current user.
raviraj.7.PXM.a > cnfuser -u rocky -p nevermind -l GROUP1 -i 20
Example screens of a user changing the password when password expiration check is On:
MGX8850.8.PXM.a >
Login: superuser
password:
Password has expired.
New password:
Re-enter new password:
ERR: Password too short (minimum: 5 characters)
New password:
Re-enter new password:
ERR: Twice-entered passwords mis-match
New password:
Re-enter new password:
ERR: Password too short (minimum: 5 characters)
You have exceeded the number of attempts allowed.
MGX8850.8.PXM.a >
Login: superuser
password:
Password has expired.
New password:
New password:
New password:
You have exceeded the number of attempts allowed.