Cisco Systems Cisco MGX 8850 manual copycons

9-43
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter9 Troubleshooting Commands copycons
copycons
Copy Channels (Debugging Command)
Copies one or more endpoints from a s pecif ied en dpoin t. The num ber of entrie s to cop y is spe cifi ed usi ng
the -num option.
This command works by incrementing the VCI for a VCC endpoints and the VPI for a VPC endpoints.
The following steps are recommen de d wh en u sin g th is co mm a nd :
1. First add a slave endpoint and then a master endpoint.
2. Copy the slave endpoints first using copychans.
3. Copy the master endpoints next using copychans.
Caution Improper use of this command can result in dangling (unpaired) endpoints in the network.
Cards on Which This Command Runs
AXSM
Syntax
copycons <source> <destn>
[-rem <remote Conn Id>]
[-num <num. conns to add>]
[-verbose <1|0>]
Syntax Description
Related Commands
addcon, delcon
source source ID: The endpoint that is to be used as a tem p la te f or co py in g, specified in the
format: ifNum.vpi.vci
destn destination ID: The en dp o in t t o pa ste the copied connection tem plate into, specified
in the format: ifNum.vpi.vci
-num The number of consecutive endpoints to be added, starting from destn endpoint.
Default: 1
-rem The remote connection ID s p ec ifie d in the format: ifNum.vpi.vci
-verbose Prints the status of cloning process if enabled. Default is disabled.
verbose: Enable(1) | Disable (0)