Cisco Systems Cisco MGX 8850 cnfrteoptthld

8-11
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter8 Network Optimization Commands cnfrteoptthld
cnfrteoptthld
Configure Route Optimization Threshold
Configure a threshold the system uses to decid e whether one route is a sufficient improvement to warr ant
re-routing. The criterion for selecting a new route is a threshold in the form of the percent of difference
in route cost.
The default for route optimization is a 30% reduction of the cost of a route. Using this mechanism, the
PXM45 selects a given route if it costs 30% less than the cost of the current route. With cnfrteoptthld,
you can change the percentage of routing cost-improvement.
Syntax
cnfrteoptthld <percent>
Syntax Description
Cards on Which Command Exec utes
PXM45
Related Commands
cnfrteopt, optrte, dsprteoptcnf, dsprteoptstat
Attributes
Example
Change the re-routing threshold to a 20% redu ctio n in the ro ute co st.
pinnacle.7.PXM> cnfrteoptthld 20
percent The percent of reduction in routing cost that triggers re-routing. The range is 5–100.
The default is 30.
Log: log State: active Privilege: GROUP1