Cisco Systems Cisco MGX 8850 manual delpart

3-41
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter3 Equipment and Resource Provisioning delpart
delpart
Delete Resource Partition
Delete a resource partition. Note th at you must delete all connections in th e resource partition before you
can delete it. For information on resource partitions, refer to the description of addpart.
Note The delpart and delrscprtn commands are identical. The name ‘delr scprtn’ is consistent wi th th e
corresponding command in Relea se 1 of the MGX 8850 switch. You can use ei th er c omm and.
Cards on Which This Command Runs
AXSM
Syntax
delpart <if_num> <part_id>
Syntax Description
Related Commands
addpart, cnfpart, dsppart
Attributes
Example
MGX8850.1.9.AXSM.a > delpart 1 1
if_num Logical interface (port) number. For AXSM, th e r an g e i s 1 –60.
part_id The partition ID number in the range 1–5. Use dspparts (or dsprscprtns) to see all
resource partitions if nece ssary.
Log: log State: active Privilege: GROUP1