6-63
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter6 Logical Node, Port, and Signaling Com m ands disablesscop
disablesscop
Disable SSCOP
The disablesscop command lets you disable SSCOP on a port. The port must be administratively down
(by the dnpnport command). Be s u r e a va li d a n d u s ef ul reason exists for d is a bl ing SSCOP.
Cards on Which This Command Runs
PXM45
Syntax
disablesscop <portid> {yes |no}
Syntax Description
Related Commands
cnfsscop, dspsscop, dspsscopstats
Attributes
Example
Disable SSCOP on port 11:2.8:28.
Geneva.7.PXM.a > disablesscop 11:2.8:28 yes
Geneva.7.PXM.a >
portid The portid is the PNNI physical port. The format is [shelf.]slot[:subslot]. port[:subport]. See
also PNNI Format, page 6-4.
yes or
no The choice for disabling or enabling SSCOP on the port:
yes means disable SSCOP.
no means enable SSCOP.
Default: no (enable S S C OP on the specified p or t)
Log: nolog State: active Privilege: GROUP1