3-84
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter3 Equipment and Resource Provisioning
dspport
dspport
Display Port
Displays the configuration for a logic al p or t . Th e di spl ay ed in fo r mat ion is shown in the example. For a
description of each item, see addport.
The total number of connection s i n t h e d isp la y includes control VCs. The ty p es o f co nt ro l V Cs ar e
SSCOP, PNNI-RCC, and ILMI (if ILMI is en ab led ) . To see the co nn ec tion counts that do not includ e
control VCs, use dsppnport.
Note The SCT ID that dspport shows pertains t o the port. For the ca rd-level SCT ID, use dspcd.
Cards on Which This Command Runs
AXSM
Syntax
dspport <ifNum>
Syntax Description
Related Commands
addport, dnport, dspports
Attributes
ifNum A logical port (interface) nu mber. Only one logical port is allowed if the line operates
as a UNI or NNI. For the virtual network to netwo rk i nt erfa ce (VN NI), mult ipl e po rts
can exist on a line. For AXSM, the range 1–60.
Log: no log State: active, standby Privilege: ANYUSER