5-80
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter5 PNNI Commands
dsppnni-node
Example
Display details about the current node. This example reflects a node in a single-peer group.
SanJose.7.PXM.a > dsppnni-node 1
node index: 1 node name: SanJose
Level............... 56 Lowest.............. true
Restricted transit.. off Complex node........ off
Branching restricted on
Admin status........ up Operational status.. up
Non-transit for PGL election.. off
Node id...............56:160:47.00918100000000309409f1f1.00309409f1f1.01
ATM address...........47.00918100000000309409f1f1.00309409f1f1.01
Peer group id.........56:47.00.9181.0000.0000.0000.0000.00
SanJose.7.PXM.a >
ATM address For the constituents of the ATM address , see the description of addpnni-node
or cnfpnni-node. Before you change the ATM address, disable the nod by
executing cnfpnni-node -enable false. See description of cnfpnni-node
Peer group id Display the -pgId of length level that is assigned to the PN N I no d e. T he peer
group is the PNNI local group.The peer gr oup co nsis ts of all PNNI nod es wi th
matching pg-id values.
The default value of level is 56 (7 bytes), which specifies the length of -pgId
to 7 bytes. However, the maximum length of -pgId is 14bytes, so disp lay
commands always display -pgId as 14 bytes with trailing zeros filling the
undefined fields. If you increase the value of level, you change the length, and
therefore the value, of -pgId, but it w il l a lways be displayed a s 14 bytes.
This is a 14-byte, for m at ted hexadecimal stri n g. L i ke a ll PNNI addresses,
identifiers, and prefixes, this value is p o rt ra ye d as a str in g of h exa de cim al
“nibbles.” One or several pairs of nibbles entail each parameter field.
(See Figure 5-7.)