Cisco Systems Cisco MGX 8850 - page 468

6-50
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter6 Logical Node, Port, and Signaling Commands
cnfsigdiag
Related Commands
delsigdiag, dspsigdiag, dspsigstats, clrsigstats
Attributes
-servctgy Filters ATM signaling call failures by service category (service type): valid entries
are: all (for all service type s), cb r, rtvb r, nrtv br, ubr, or a br.
Default: all
-status The status of the entry for the signaling diagnostics filter table. Type active to begin
filtering failed connections or inactive to stop filtering failed connections. The
inactive specification cause s th e n ode to delete all the records a ssociated with the
filter entry.
Default: inactive
Log: log State: active Privilege: ANYUSER