Cisco Systems Cisco MGX 8850 cnfenhiisp

6-22
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter6 Logical Node, Port, and Signaling Commands
cnfenhiisp
cnfenhiisp
Configure Enhanced IISP—enable or disable enhanced IISP features.
The cnfenhiisp command enables or disables the enhanced IISP feature on the port. This command
applies to only IISP ports. When you chan ge the operational state of enhanced IISP, the change does no t
affect existing calls.
The items that enhanced IISP incl ud e a re :
•Generic identifier transport ( GIT )
•Virtual path service over the IISP
•Added support or nrt-VBR and rt-VBR
•Transport of frame discard specific at io n
Cards on Which This Command Runs
PXM45
Syntax
cnfenhiisp <portid> {yes |no}
Syntax Description
Related Commands
dspenhiisp
Attributes
Examples
Enable enhanced IISP on port 11 :2 .1 :1 .
Geneva.7.PXM.a > cnfenhiisp 11:2.1:1 yes
portid The portid is the PNNI ph ysi cal port. The format is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page 6-4.
yes |no Enter “yes” to enable enhanced IISP or “no” to disable enhanced IISP.
Default= no
Log: log State: active Privilege: SUPER_GP