Cisco Systems Cisco MGX 8850 - page 129

2-71
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter2 Shelf Management Commands dspversion
Pre-release, developmental versions have one or two alphanumeric characters at the end of the version
number, and these versions may appea r i n variou s c on texts . For exam ple, the help display for setrev
gives examples of revision, but only the fir st two in the following list could be in re leased product. These
two bullets show major release 2, minor release 1, and the minimal maintenance number of 1. The last
three bullets show developm e ntal revision numbers:
•2.0(1) Note the absence of a patch number.
•2.0(1.248) Note the patch number is 248.
•2.0(0.1)A1 Note the phase number is A1.
•2.0(0.10)D2 Note the phase number is D2.
•2.0(0.248)P1, 2.0(0.1)P2, 2.0(0.113)P3, 2.0(0.10)P4
Cards on Which This Command Executes
PXM45, AXSM
Syntax
dspversion
Syntax Description
This command takes no parameters.
Related Commands
abortrev, commitrev, loadrev, runrev, setrev, dspcd
Attributes
Example
Display the firmware version for the current PXM45.
pop20two.7.PXM.a > dspversion
Image Type Shelf Type Card Type Version Built On
---------- ---------- ---------- ------------ ------------
Runtime MGX PXM45 2.0(0.30)P2 Jan 17 2001, 16:43:13
Boot MGX PXM45 2.0(0.30)P1 -
Display firmware image on the AX S M in sl ot 1. As the example shows, the comm a nd exec ut es o n th e
CLI of the AXSM after you have switched (cc) to th at CLI.
Unknown.1.AXSM.a > dspversion
Image Type Shelf Type Card Type Version Built On
---------- ---------- ---------- ------------ ------------
Runtime MGX AXSM 2.0(0.30)P2 Jan 17 2001, 17:06:31
Boot MGX AXSM 2.0(0.15)A -
Log: no log State: active, standby, init Privilege: ANYUSER