Cisco Systems Cisco MGX 8850 - page 510

6-92
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter6 Logical Node, Port, and Signaling Commands
dsppnportloscallrel
dsppnportloscallrel
Display PNNI Port Loss of Signal Call Release
This command displays the enable status of the LOS cal l r ele as e fe at ure. S ee cnfpnportloscallrel for a
description of this feature.
Cards on Which This Command Runs
PXM45
Syntax
dsppnportloscallrel <portid>
Syntax Description
Related Commands
cnfpnportloscallrel
Attributes
Example
First, confirm that LOS call release is disabled on port 3:1. 1:1. Enable it, then confirm th at it is enabled.
8850_NY.8.PXM.a > dsppnportloscallrel 3:1.1:1
Call release on Los :disabled
8850_NY.8.PXM.a > cnfpnportloscallrel 3:1.1:1 yes
8850_NY.8.PXM.a > dsppnportloscallrel 3:1.1:1
Call release on Los :enabled
portid The portid is the PNNI physical port. Th e f o rm at is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page 6-4.
Log: nolog State: active, release Privilege: ANYUSER