Cisco Systems Cisco MGX 8850 dsppnportrsrc

6-94
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter6 Logical Node, Port, and Signaling Commands
dsppnportrsrc
dsppnportrsrc
Display Port Resources
Displays available bandwidth and ch an nels on the port for all servic e classes.
Cards on Which This Command Runs
PXM45
Syntax
dsppnportrsrc <portid>
Syntax Description
Related Commands
dsppnports
Attributes
Example
Display the available resources on port 11:1.1:11.
GGeneva.7.PXM.a > dsppnportrsrc 11:1.1:11
cbr: rt-vbr: nrt-vbr: ubr
: abr: sig:
Maximum Tx Cell Rate (cells/sec): 351707 351707 351707 35170
7 351707 353207
Maximum Rx Cell Rate (cells/sec): 351707 351707 351707 35170
7 351707 353207
Min Guarant Tx Cell Rate (cells/sec): 0 0 0
0 0 1500
Min Guarant Rx Cell Rate (cells/sec): 0 0 0
0 0 1500
Minimum Cell Loss Ratio Tx : 10 8 6
6 6 8
Minimum Cell Loss Ratio Rx : 10 8 6
6 6 8
Available Tx Cell Rate (cells/sec): 344035 344035 344035 34403
5 344035 344035
Available Rx Cell Rate (cells/sec): 344035 344035 344035 34403
5 344035 344035
# of Available Tx Channels: 28903 28903 28903 2890
3 28903 28903
# of Available Rx Channels: 28903 28903 28903 2890
3 28903 28903
portid See PNNI Format, page 6-4. The portid r ep re sen ts t he P NN I ph ysi cal p or t an d ha s th e
format [shelf.]slot[:subslot].port[:subport].
Log: log State: active, standby Privilege: ANYUSER