2-74
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter2 Shelf Management Commands
ipifconfig
Related Commands
dspipif, pvcifconfig, dsppvcif, svcifconfig, dspsvcif, dspipifcache
Attributes
Example
Specify a IP interface with an ATM interface type, address of 163.72.29.177, and a net mask of
255.255.255.000, and use the defaults for all other parameters.
wilco.7.PXM.a > ipifconfig atm0 163.72.29.177 mask 255.255.255.000
pvc | nopvc (Optional) Specify whether PVC support is enab led. The defa u lt for th is para meter is
enabled (pvc). The application of PVC support is for a device in the network
management path that provides I P connect ivit y bu t does not support SVCs. W ith P VC
support enabled, you subsequently set up a PVC to that device by executing
pvcifconfig. If PVC support is not enabled, pvcifconfig fails.
If you change this value, type th e word pvc or nopvc in its entirety.
default |
nodefault (Optional) Specifies whether to use thi s interface as the default interface. As stated in
the description of the interface parameter, the default inter fa ce is Ethernet the first
time the switch powers up. You can change th e de fau lt by en ter i ng t he default or
nodefault keyword. For example, if you currently are specifying an ATM interface
(atm0) on the control port, you can make it the default (upon subsequent node reset)
by typing the keyword default.
clrstats Clear all interface and connec tio n sta ti s tic s f or t he s p eci fied interface type. The
statistics pertain to incoming an d o ut go in g p ack ets, er r or ed p ack ets, an d so on.
Log: no log State: active Privilege: SUPER_GP