Cisco Systems Cisco MGX 8850 manual uppnport

6-117
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter6 Logical Node, Port, and Signaling Com m ands uppnport
uppnport
Up PNNI Port:
The uppnport command lets you put a UNI or NNI port into service (administratively “up” the port).
The circumstances in which you would use the uppnport command are as follows:
•After you have downed the port for any reason by using the dnpnport command
•After you have pre-configured a port by using the addpnport command (see taddpnport
description)
Cards on Which This Command Runs
PXM45
Syntax
uppnport <portid>
Syntax Description
Related Commands
addpnport, delpnport, dnpnport, dsppnport, dsppnports
Attributes
portid The portid is the PNNI physical port. Th e f o rm at is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page 6-4.
Log: log State: active Privilege: GROUP1