Cisco Systems Cisco MGX 8850 - page 174

3-14
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter3 Equipment and Resource Provisioning
addpart
Example
Create a resource partition with the following parameters:
•Logical port 4 (already created by exec ut in g addport)
•Partition number 4
•Controller ID 2 (the reserved ID for PNNI)
•10% of the bandwidth in the egress and ingress directions reserved for this partition
•The range for VPIs is 10–110, the range for VCIs is 100–2000
•Minimum guaranteed connections is 100, maximum number of connections is 500
MGX8850.3.AXSM.a > addpart 4 4 2 100000 100000 100000 100000 10 110 100 2000 100 500
Check the configuration with dspparts and dsppart.
MGX8850.3.AXSM.a > dspparts
if part Ctlr egr egr ingr ingr min max min max min max
Num ID ID GuarBw MaxBw GuarBw MaxBw vpi vpi vci vci conn conn
(.0001%)(.0001%)(.0001%)(.0001%)
-----------------------------------------------------------------------------
4 4 2 100000 100000 100000 100000 10 110 100 2000 100 500
MGX8850.3.AXSM.a > dsppart 4 4
Interface Number : 4
Partition Id : 4 Number of SPVC: 0
Controller Id : 2 Number of SPVP: 0
egr Guaranteed bw(.0001percent): 100000 Number of SVC : 0
egr Maximum bw(.0001percent) : 100000
ing Guaranteed bw(.0001percent): 100000
ing Maximum bw(.0001percent) : 100000
min vpi : 10
max vpi : 110
min vci : 100
max vci : 2000
guaranteed connections : 100
maximum connections : 500