Cisco Systems Cisco MGX 8850 delconsegep

7-33
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter7 SPVC and SVC Commands delconsegep
delconsegep
Delete Connection Segment Endpoint
Deletes a segment endpoint on a connection. When both VPI and VCI are present, the segment endpoint
is an F5 flow endpoint (for VCCs). When the optional VCI is not present, the segment endpoint is an F4
flow endpoint (for VPCs).
Note The delconsegep command works for SVCs only.
Cards on Which This Command Runs
PXM45
Syntax
delconsegep <portid>
vpi
[vci]
Syntax Description
Related Commands
cnfoamsegep, dspoamsegep, cnfconsegep, dspconsegep
Attributes
portid The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also PNNI Format, page 7-4.
vpi VPI of the connec ti on .
vci VCI of the connection.
Log: log State: active Privilege: GROUP1