Cisco Systems Cisco MGX 8850 dsppnctlvc

6-86
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter6 Logical Node, Port, and Signaling Commands
dsppnctlvc
dsppnctlvc
Display Control VC Parameters
The command lets you display the bandwidth parameters for the control VCs on the port. These
bandwidth paramete rs re sult from the use of t he (optional) cnfpnctlvc command.
Note To see details about the VCs that support ILMI, use dsppnilmi.
Cards on Which This Command Runs
PXM45
Syntax
dsppnctlvc <portid>
Syntax Description
Related Commands
cnfpnctlvc
Attributes
Example
Display the configuration of control VCs on port 10:1.1:1.
Geneva.7.PXM.a > dsppnctlvc 10:1.1:1
vc type = pnnircc
service category : sig PCR : 906
SCR : 453 MBS : 171
vc type = sscop Parameter = Provisioned
service category : sig PCR : Not Provisioned
SCR : Not Provisioned MBS : Not Provisioned
vc type = sscop Parameter = Operational
service category : cbr PCR : 0
Geneva.7.PXM.a >
portid The portid is the PNNI physical port. Th e f o rm at is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page 6-4.
Log: nolog State: active, standby Privilege: ANYU SE R