Cisco Systems Cisco MGX 8850 - page 464

6-46
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter6 Logical Node, Port, and Signaling Commands
cnfsig
Related Commands
dspsig
Attributes
-t310 The T310 timer.
Range:
•10–20 seconds for UN I .
•30–120 seconds for PNNI. The range you can specify for PNNI is 30–1 20. If you
do not specify a T310 timer value for PNN I, it remains the defa ult of 10 seconds
for PNNI.
Default: 10
-t316 The t316-timer: Set the T316 timer.
Range: 90–300 seconds
Default: 90
-t317 The t317-timer: Set the T317 timer.
Range: 60–300 seconds
Default: 60
-t322 The t322-timer: Set the T322 timer.
4–20 seconds.
Default: 4
-t397 The t397-timer: Set the T397 timer.
Range: 180–240 seconds
Default: 180
-t398 The t398-timer: Set the T398 timer.
Range: 4–20 seconds
Default: 4
-t399 The t399-timer: Set the T399 timer.
Range: 14–28 seconds for UNI 3.0 and 3.1.
Default: 14.
-maxcrbk The maximum number of crankback attempts allowed on the port.
Range: 0–10
Default: 3
Log: log State: active Privilege: SUPER_GP