7-15
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter7 SPVC and SVC Commands clrpncon
clrpncon
Clear Connection
Delete a call—either all SVCs or a s pe cifi c S V C o n a p or t . ( If y o u att empt to clear an SPVC with th is
command, the switch deletes the co nn ec tion but then automatically attemp ts to rer o ut e it. For an SP V C
or SPVP, use delcon so you can delete the endpoints.)
Cards on Which This Command Runs
PXM45
Syntax
clrpncon <portid>
{all | vpi}
[vci]
Syntax Description
Related Commands
dsppncon, dspncons
Attributes
portid The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also PNNI Format, page 7-4.
all | vpi Specifies either all VPIs on the port or a specific VPI.
Possible values are either the strin g “al l” or a VPI in the range 0–4095.
vci VCI of a specific SVC to clear. If you a re clearing a virtual path conn ect io n
(VPC), do not enter a VCI.
Log: log State: active Privilege: SUPER_GP