5-31
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter5 PNNI Commands cnfpnni-node
Figure5-6 Cisco Factory-shipped Defaults for PNNI Peer Group Identifier, PNNI Summary Address,
ATM Address, and PNNI Node Identifier
Usage Guidelines
All MGX 8850 cards ship with default addresses. These defaults are provided for evaluation of the
switch. Before or while you deploy a switch, you shoul d change the def ault a ddress es by ex ecuti ng e ither
cnfpnni-node or addpnni-node. The Cisco MGX 8850 Routing Switch Software Configuration Guide
explains node addressing in the section Guidelines for Creating an Address Plan.
The ATM address, address prefixes, and peer group ID share some default field values, as shown in
Figure5-6.
Related Commands
addpnni-node, delpnni-node, dsppnni-node, addaddr
Attributes
Example
This example shows the cnfpnni-node command line that specifies t he PNNI configuration values for a
node that already exists on the network. The command line configures the PNNI node as follows:
The PNNI hierarchy level is 56.
The node ATM address is 47.0091 8100000000309409f1f1.00309409f1f1.01.
The node PNNI identifier is 56:160:47.00918100000000309409f1f1.00309409f1f1.01.
The node PNNI group identifier is 56:47.009181.0000.00. The length specified by the hierarchy
level is 56 (8 bytes) the following 1 2 zeros are fill.
47
1
11
# of
Bytes 21
Default PNNI
peer group identifier
136 6
ATM
address
format
0056 160 91 81 00 00 00 XX XX XX XX XX XX XX XX XX XX XX XX 00
53346
Cisco
ICD MAC address MAC address
ATM
address
length
PNNI
hierarchy
level
Default PNNI
summary address
Default ATM address
Default PNNI
node identifier
Log: log State: active Privilege: SUPER_GP