3-13
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter3 Equipment and Resource Provisioning addpart
Related Commands
cnfpart, delpart, dspparts, dsppart
Attributes
ctrlr_id A number in the range 1–3 that identifies a network controller. The numbers a re
reserved, as follows:
1 = PAR (Portable AutoRoute)—currently not used
2 = PNNI
3 = LSC (Label Switch Contro ll er, also k n own as MP L S f or M u lt ip rotocol Label
Switch Controller)—currently not used
egrminbw A guaranteed percenta ge of egress bandwidth. Each unit of egrminbw is 0.000001 of
the total bandwidth on the port. (An egrMinBw of 1000000 = 100%.) This approach
provides a high level of granularity.
egrmaxbw A maximum percentage of the bandwidth. Each unit of egrmaxbw is 0.000001 of the
total bandwidth available to t he p or t. (An eg rMaxBw of 1000000 = 100%.) The
resulting bandwidth must be at least 50 cps.
ingminbw A guaranteed percentage of the ingress ba ndwid th. Eac h unit of ingminbw is 0.000001
of the total bandwidth availa bl e t o the port. For example, an ingMinBw of
1000000 = 100%.
ingmaxbw A maximum percentage of the ingress bandwidth. Each increment of ingmaxbw is
0.000001 of the total bandwidth on the port. For example, an ingMaxBw of
1000000 = 100%. Note that the maximum ingress bandwidth must be at least 50 cps.
minvpi Minimum VPI. For NNI, the range is 0–4095. For UNI, the range is 0–255.
maxvpi Maximum VPI in the range 0–4095 for an NNI. For a UNI, the range is 0–255. The
maxvpi cannot be less than the minvpi.
minvci Minimum VCI in the range 0–2000 (OC-48 only) or 32–65535.
maxvci Maximum VCI in the range 0–2000 (OC-48 only) or 32–65535.
minConns A guaranteed number of connections. The range is between 0 and the maximum
number of connections in the p ort gr o up . S ee ds pcd for information on port groups.
maxConns A maximum number of connections. The range is between 10 and the maximum
number of connections in the p ort gr o up . S ee ds pcd port group information. The
value of maxConns cannot be less than the value of minConns.
Log: log State: active Privilege: GROUP1