Cisco Systems Cisco MGX 8850 - page 316

5-22
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter5 PNNI Commands
cnfpnni-intf
Syntax Description
If you enter -awall to specify an AW, it overrides the AW for all individual service types.
t
portid The PNNI physical port ID. The portid has the format
[shelf.]slot[:subslot].port[:subport]. For more details about por tid, see PNNI
Format.
Default: none
-aggregationToken Specify a 32-bit number for logical link aggregation between a peer group
leader and the lowest level.
Range: 0–2147483648
Default: 0
The current release does not support multiple PNNI levels, so this parameter
has no meaning.
-awcbr Specify the administrative weight for constant bit rate (CBR) on th is interface.
Range: 0–4194304
Default: 5040
-awrtvbr Specify the administrative weight for real-time variable bit rate (rt-VBR) on
this interface.
Range: 0–4194304
Default: 5040
-awnrtvbr Specify the administrative weight for non-re al-ti me var iable bit rate (nrt -VBR)
on this interface.
Range: 0–4194304
Default: 5040
-awabr Specify the administrative weight for available bit rate (ABR) on this
interface.
Range: 0–4194304
Default: 5040
-awubr Specify the administrative w ei g ht for unspecified bit rat e ( U B R) o n this
interface. UBR connections can i nc lu d e SVC ping connections.
Range: 0–4194304
Default: 5040
-awall Specify the administrative weight for all service types on this inter face. If you
use -awall, this aw becomes the AW for every service type on this port.
Range: 0–4194304
Default: 5040