3-77
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter3 Equipment and Resource Provisioning dsplns
dsplns
Display Lines
Displays the configuration for al l l in es o n a card. For each line, the out pu t in fo r mat io n consists of the:
•Bay and line number
•Line state—up (active) or down (inactive)
•The line type
•Whether any loopback currently ex is ts on t he line
•Line coding
•Frame scrambling status (enabled or disabled)
•Configured line length in meters (applies to only T3 or E3)
•Criteria for Out of Frame (OOF) error (applies to only T3 or E3)
•Whether C-bit (AIS) checking is enabled (applies to only T3 or E3)
•The medium line type—long reach, single-mode fiber, for example
•The alarm status—clear, critical, and so on
For information on an individual line, use dspln. Al so, the dspln command shows the transm it cloc k
configuration if one exists.
Note Only lines that have Admin status up are displayed.
Cards on Which This Command Runs
AXSM
Syntax
dsplns
Related Commands
cnfln, dspcds, dspln, upln
Attributes
Log: no log State: active, standby Privilege: ANYUSER