3-37
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter3 Equipment and Resource Provisioning cnfrscprtn
Related Commands
addrscprtn, delrscprtn, dsprscprtns, dsprscprtn
Attributes
Example
For logical port 1 on partition number 2, conf igure the PNNI cont roller (t he numbe r 2) to ha ve 10 %–15%
of the bandwidth on b oth the ingress and eg ress, a VPI range of 20–100, a VCI range of 1–32767, a
minimum guaranteed number of 1000 connections (channels) and a maximum of 2000 connections.
MGX8850.1.2.AXSM.a > cnfrscprtn 1 2 2 100000 150000 10000 15000 20 100 1 32767 1000 2000
-emax A maximum per c en ta ge of the bandwidth. E ac h unit of egrM axBw is 0.00001 of the
total bandwidth available to t he p or t. (An eg rMaxBw of 1000000 = 100%.) The
resulting bandwidth must be at least 50cps.
-imin A guaranteed percentage of the ingress b andwi dt h. E ach u ni t of ingMinBw is 0.00001
of the total bandwidth a vailable to the port. For example, an ingMinBw of 1000000 =
100%.
-imax A maximum percentage of the ingress bandwidth. Each increment of ingMaxBw is
0.00001 of the total bandwidth on the port. For example, an ingMaxBw of 1000000 =
100%. Note that the maximum ingress bandwidth must be at least 50 cps.
-vpmin Minimum VPI. For NNI, the range is 0–4095. For UNI, the range is 0–255.
-vpmax Maximum VPI in the range 0–4095 for an NNI. For a UNI, the range is 0–255. The
maxvpi cannot be less than the minvpi.
-vcmin Minimum VCI in the range 0–2000 (OC-48 only) or 32–65535.
-vcmax Maximum VCI in the range 0–2000 (OC-48 only) or 32–65535.
-mincon A guaranteed number of connections. The range is between 0 and the maximum
number of connections in the p ort gr o up . S ee ds pcd for information on port groups.
-maxcon A maximum number of connections. The range is from 10 to the maximum number
of connections in the port group. See dspcd port g roup info rmati on. maxConns cannot
be less than minConns.
Log: log State: active Privilege: GROUP1