Cisco Systems Cisco MGX 8850 - page 136

2-78
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter2 Shelf Management Commands
loadrev
Pre-release, developmental versions have one or two alphanumeric characters at the end of the version
number, and these versions may appea r in various contexts. For example, the h el p d is play for setrev
gives examples of revision, but only the fir st two in the following list could be in re leased product. These
two bullets show major release 2, minor release 1, and the minimal maintenance number of 1. The last
three bullets show developm e ntal revision numbers:
•2.0(1) Note the absence of a patch number.
•2.0(1.248) Note the patch number is 248.
•2.0(0.1)A1 Note the phase number is A1.
•2.0(0.10)D2 Note the phase number is D2.
•2.0(0.248)P1, 2.0(0.1)P2, 2.0(0.113)P3, 2.0(0.10)P4
Cards on Which This Command Runs
PXM45
Syntax
loadrev <slot> <revision>
Syntax Description
Related Commands
abortrev, commitrev, runrev, setrev, dspversion, dspcd
Attributes
Example
Load version 2.0(0.4) to the AXSM in slot 5.
pinnacle.7.PXM.a > loadrev 5 2.0(0.4)
slot The number of the targeted card slot.
revision Revision number derive d fr o m th e firmware file. See “Version Numbering Conventions.”
Log: log State: active Privilege: SERVICE_GP