Procedure
Step 1 Inthe Navigation pane, clickthe Equipment tab.
Step 2 Onthe Equipment tab, expand Equipment >Fabric Interconnects >Fabric_Interconnect_Name.
Step 3 Inthe Work pane, click the General tab.
Step 4 Inthe Actions area of the Generaltab, click one of the following links:
•SetFibre Channel Switching Mode
•SetFibre Channel End-Host Mode
Thelink for thecurrent mode isdimmed.
Step 5 Inthe dialogbox, clickYes.
CiscoUCS Manager restarts the fabric interconnect, logs you out, and disconnects Cisco UCS Manager GUI.
Changing the Properties of the Fabric Interconnects
Tochange the subnet for a Cisco UCS domain, you must simultaneously change all subnets, the virtual
IPaddress used to access Cisco UCS Manager, and the IP addresses for all fabric interconnects.
Note
Procedure
Step 1 Inthe Navigation pane, clickthe Admin tab.
Step 2 Onthe Admin tab, clickAll.
Step 3 Inthe Work pane, click the General tab.
Step 4 Inthe Actions area, clickManagement Interfaces to open the Management Interfaces dialog box.
Step 5 Tochange only the virtual IP address that you use to access Cisco UCS Manager, enter the desired IP address
inthe IP Address field in the Virtual IP area.
Step 6 Tochange only the name assigned to the Cisco UCS domain, enter the desired name in the Name field in the
VirtualIP area.
Step 7 Tochange the subnet, IP address, and default gateway assigned to the fabric interconnects, update the following
fields:
a) In the Virtual IP area, change the IP address used to access Cisco UCS Manager in the IPAddress field.
b) In the Fabric Interconnect area for each fabric interconnect, update the following fields:
DescriptionName
TheIP addressto usewhen communicatingwith the fabric
interconnect.
IPAddress field
Theassociated subnet mask.SubnetMask field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 75
Changing the Properties of the Fabric Interconnects