DescriptionName
Thiscan be one of the following:
•Primary—Thefirst address definedfor theassociated boot
deviceclass. A boot policy can only have one primary LAN,
SAN,or iSCSI boot location.
•Secondary—Thesecond address defined for the associated
bootdevice class. Each boot policy can have only one secondary
LANor SAN boot location.
Theuse of the terms primary or secondary boot devices does not
implya boot order. The effective order of boot devices within the
samedevice class isdetermined by PCIe bus scan order.
Typefield
d) If this vHBA points to a bootable SAN image, click the Add SAN Boot Targetlink and, in the Add SAN
BootTarget dialog box, complete the following fields, then click OK:
DescriptionName
TheLUN thatcorresponds tothe locationof the
bootimage.
BootTarget LUN field
TheWWPN that corresponds to the location of the
bootimage.
BootTarget WWPN field
Thiscan be one of the following:
•Primary—Thefirst address defined for the
associatedboot device class. A boot policy
canonly have one primaryLAN, SAN, or
iSCSIboot location.
•Secondary—Thesecond address defined for
theassociated boot deviceclass. Eachboot
policycan have only one secondary LAN or
SANboot location.
Theuse of the terms primary or secondary boot
devicesdoes not imply a boot order. The effective
orderof boot devices within the same device class
isdetermined by PCIe bus scan order.
Typefield
e) Add another boot device to the Boot Order table, or click OK to finish.
Step 14 Click OK.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
552 OL-25712-04
Managing Service Profiles