b) Inthe VLANs area, use the table to select the VLAN to assign to vNICs created from this template. The
tablecontains the following columns:
DescriptionName
Checkthe check box inthis column for each VLAN that you want
touse.
Selectcolumn
Thename of theVLAN.Namecolumn
Todesignate one of the VLANs as the native VLAN, click the radio
buttonin this column.
NativeVLAN column
Clickthis link ifyou want to create a VLAN.CreateVLAN link
c) In the Policies area, complete the following fields:
DescriptionName
Themaximum transmission unit, orpacket size, that vNICs created
fromthis vNICtemplate should use.
Enteran integer between 1500 and 9216.
Ifthe vNIC template has an associated QoS policy, the MTU
specifiedhere must be equal to or less than the MTU
specifiedin theassociated QoS system class. If this MTU
valueexceeds the MTU value in theQoS system class,
packetsmay be droppedduring data transmission.
Note
MTUfield
TheMAC addresspool that vNICs created from this vNIC template
shoulduse.
MACPool drop-down list
Thequality of service policy that vNICs createdfrom this vNIC
templateshould use.
QoSPolicy drop-down list
Thenetwork control policy that vNICs createdfrom this vNIC
templateshould use.
NetworkControl Policy
drop-downlist
TheLAN pingroup that vNICs created from this vNIC template
shoulduse.
PinGroup drop-down list
Thestatistics collection policy that vNICs created from this vNIC
templateshould use.
StatsThreshold Policy
drop-downlist
Step 6 ClickOK.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
310 OL-25712-04
Configuring vNIC Templates