DescriptionName
Aregular expression that definesthe iSCSI Qualified Name (IQN) or
ExtendedUnique Identifier (EUI) nameof theiSCSI target.
Youcan enter any alphanumeric characters as well as the following
specialcharacters:
.(period)
:(colon)
-(dash)
Thisname must be properly formatted using standard IQN
orEUI guidelines.
Important
Thefollowing examplesshow properly formattediSCSI target names:
iqn.2001-04.com.example
iqn.2001-04.com.example:storage:diskarrays-sn-a8675309
iqn.2001-04.com.example:storage.tape1.sys1.xyz
iqn.2001-04.com.example:storage.disk2.sys1.xyz
eui.02004567A425678D
iSCSITarget Name field
Thesystem-assigned priority forthe iSCSItarget.Priorityfield
Theport associatedwith the iSCSItarget.
Enteran integer between 1 and 65535. The default is 3260.
Portfield
Thename ofthe associatedauthentication profile.AuthenticationProfile drop-down
list
Clickthis link to create a new authentication profile policy that will be
availableto all iSCSIvNICs.
CreateAuthentication Profile
link
TheIPv4 addressassigned to theiSCSI target.IPv4Address field
TheLUN identifierin the iSCSItarget.LUNId field
Step 16 If you chose iSCSI Auto Target Interface, enter either the initiator name or the DHCP vendor ID in the
DHCPVendor Id field. The initiator must have already been configured. The vendor ID can be up to 32
alphanumericcharacters.
Step 17 Click OK.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 457
iSCSI Boot