Example:
Fabric(boot)#
load/installables/switch/ucs-6100-k9-system.4.1.3.N2.1.0.211.bin
Step 9 Afterthe system image loads, log in to Cisco UCS Manager.
Recovering the Admin Account Password in a Cluster Configuration
Thisprocedure will help you to recover the password that you set for the admin account when you performed
aninitial system setup on the fabric interconnects. The admin account is the system administrator or superuser
account.
Before You Begin
1Physicallyconnect a console port on one of the fabric interconnects to a computer terminal or console
server
2Obtainthe following information:
• The firmware kernel version on the fabric interconnect
• The firmware system version
• Which fabric interconnect has the primary leadership role and which is the subordinate
Tofind this information, you can log in with any user account on the Cisco UCS domain.Tip
Procedure
Step 1 Connectto the consoleport.
Step 2 Forthe subordinatefabric interconnect:
a) Turn off the power to the fabric interconnect.
b) Turn on the power to the fabric interconnect.
c) In the console, press one of the following key combinations as it boots to get the loader prompt:
•Ctrl+l
•Ctrl+Shift+r
Youmay need to press the selected key combination multiple times before your screen displays the loader
prompt.
Step 3 Powercycle the primaryfabric interconnect:
a) Turn off the power to the fabric interconnect.
b) Turn on the power to the fabric interconnect.
Step 4 Inthe console, press one of the following key combinationsas it boots to get the loader prompt:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
636 OL-25712-04
Recovering a Lost Password