Adding a Chassis to a Power Group
Procedure
Step 1 Inthe Navigation pane, clickthe Equipment tab.
Step 2 Onthe Equipment tab, click the Equipment node.
Step 3 Inthe Work pane, click the Power Groups tab.
Step 4 Right-clickthe power group to which you want to add a chassis and choose Add Chassis Members.
Step 5 Inthe Add ChassisMembers dialog box, do the following:
a) In the Chassis table, choose one or more chassis to include in the power group.
b) Click the >> button to add the chassis to the Selected Chassis table that displays all chassis included in
thepower group.
Youcan use the << button to remove one or more chassis from the power group.
c) Click OK.
Removing a Chassis from a Power Group
Procedure
Step 1 Inthe Navigation pane, clickthe Equipment tab.
Step 2 Onthe Equipment tab, click the Equipment node.
Step 3 Inthe Work pane, click the Power Groups tab.
Step 4 Expandthe power group from which you want to remove a chassis.
Step 5 Right-clickthe chassis that you want to remove from the power group and choose Delete.
Step 6 Ifthe CiscoUCS Manager GUI displaysa confirmation dialog box, clickYes.
Deleting a Power Group
Procedure
Step 1 Inthe Navigation pane, clickthe Equipment tab.
Step 2 Onthe Equipment tab, click the Equipment node.
Step 3 Inthe Work pane, click the Power Groups tab.
Step 4 Right-clickthe power groupthat youwant todelete and chooseDelete.
Step 5 Ifthe CiscoUCS Manager GUI displaysa confirmation dialog box, clickYes.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
568 OL-25712-04
Configuring Policy-Driven Chassis Group Power Capping