Modifying an Import OperationProcedure
Step 1 Inthe Navigation pane, clickthe Admin tab.
Step 2 Clickthe All node.
Step 3 Inthe Work pane, click the General tab.
Step 4 Inthe Actions area, clickImport Configuration.
Step 5 Inthe Import Operations area of the Import Configuration dialog box, click the import operation that you
wantto modify.
Thedetails of the selected import operation display in the Properties area. If the import operation is in a
disabledstate, the fields are dimmed.
Step 6 Inthe Admin State field,click the enabled radio button.
Step 7 Modifythe appropriatefields.
Youdo not have to enter the password unless you want to run the import operation immediately.
Step 8 (Optional) If you do not want to run the import operation immediately, click the disabled radio button in the
AdminState field.
Step 9 ClickOK.
Deleting One or More Import OperationsProcedure
Step 1 Inthe Navigation pane, clickthe Admin tab.
Step 2 Clickthe All node.
Step 3 Inthe Work pane, click the General tab.
Step 4 Inthe Actions area, clickImport Configuration.
Step 5 Inthe Import Operationstable of theBackup Configuration dialog box, clickthe import operations that
youwant to delete.
Youcannot click an import operation in the table if the admin state of the operation is set to Enabled.Tip
Step 6 Clickthe Delete icon in the icon bar of the Import Operations table.
Step 7 Ifthe CiscoUCS Manager GUI displaysa confirmation dialog box, clickYes.
Step 8 Inthe Import Configurationdialog box, clickone of thefollowing:
DescriptionOption
Deletesthe selected import operations without closing the dialog box.
Apply
Cisco UCS Manager GUI Configuration Guide, Release 2.0
630 OL-25712-04
Import Operations