Adding a Threshold Class to the Uplink Ethernet Port Threshold Policy
Youcannot create an uplink Ethernet port threshold policy. Youcan only modify or delete the default
policy.
Tip
Procedure
Step 1 Inthe Navigation pane, clickthe LAN tab.
Step 2 Onthe LAN tab, expand LAN >LAN Cloud.
Step 3 Expandthe Threshold Policies node.
Step 4 Right-clickThr-policy-default and choose the Create Threshold Class.
Step 5 Inthe Choose StatisticsClass page of theCreate Threshold Class wizard, do the following:
a) From the Stat Class drop-down list, choose the statistics class for which you want to configure a custom
threshold.
b) Click Next.
Step 6 Inthe Threshold Definitions page, do the following:
a) Click Add.
TheCreate Threshold Definition dialog box opens.
b) From the Property Typefield, choose the threshold property that you want to define for the class.
c) In the Normal Value field, enter the desired value for the property type.
d) In the Alarm Triggers (Above Normal Value)field, check one or more of the following check boxes:
•Critical
•Major
•Minor
•Warning
•Condition
•Info
e) In the Up and Down fields, enter the range of values that should trigger the alarm.
f) Inthe Alarm Triggers(Below Normal Value) field, check one or more of the following check boxes:
•Info
•Condition
•Warning
•Minor
•Major
Cisco UCS Manager GUI Configuration Guide, Release 2.0
670 OL-25712-04
Configuring Statistics Threshold Policies