Theport or ports are enabled. Data traffic can begin to travel through them.
Disabling a Port on a Fabric Interconnect
Afteryou enable or disable a port on a fabric interconnect, wait for at least 1 minute before you reacknowledge
thechassis. If you reacknowledge the chassis too soon, the pinning of server traffic from the chassis may not
beupdated with the changes to the port that you enabled or disabled.
Procedure
Step 1 Inthe Navigation pane, clickthe Equipment tab.
Step 2 Onthe Equipment tab, expand Equipment >Fabric Interconnects >Fabric_Interconnect_Name.
Step 3 Dependingupon the location of the ports you wantto disable, expand one of thefollowing:
•FixedModule
•ExpansionModule
Step 4 Dependingupon the type of portyou wantto disable,expand one of the following:
•AppliancePorts
•FCoEStorage Ports
•ServerPorts
•StorageFC Ports
•UplinkEthernet Ports
•UplinkFC Ports
Step 5 Clickthe port orports youwant todisable.
Youcan use the Shift key or Ctrl key to select multiple entries.
Step 6 Right-clickthe selected port orports andchoose Disable.
Theport or ports are disabled. No data traffic can travel through them.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
88 OL-25712-04
Disabling a Port on a Fabric Interconnect