DescriptionName
Checkthe check box in this column for each VLAN you want to use.Selectcolumn
Thename of theVLAN.Namecolumn
Todesignate one of the VLANs as the native VLAN, click the radio
buttonin this column.
NativeVLAN column
c) If you clicked the access radio button, choose a VLAN from the Select VLAN drop-down list.
Step 7 (Optional) If you want to add an endpoint, check the Ethernet Target Endpoint check box and complete
thefollowing fields:
DescriptionName
Thename of theendpoint.
Thisname can be between 1 and 16 alphanumeric characters. You
cannotuse spaces or any special characters other than - (hyphen), _
(underscore),: (colon), and . (period), and you cannot change this name
afterthe object has beensaved.
Namefield
TheMAC address for theendpoint.MACAddress field
Step 8 ClickNext.
Step 9 Inthe Add Ports page of theCreate Port Channel wizard, do the following:
a) In the Ports table, choose one or more ports to include in the port channel.
b) Click the >> button to add the ports to the Ports in the port channel table.
Youcan use the << button to remove ports from the port channel.
CiscoUCS Manager warnsyou if yourconfiguration could cause issueswith service profiles or
portconfigurations. You can click Yes in the dialog box if you want to create the port channel
despitethose potential issues.
Note
Step 10 Click Finish.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
102 OL-25712-04
Appliance Port Channels