Procedure
Step 1 Inthe Navigation pane, clickthe Admin tab.
Step 2 Onthe Admin tab, expand All >User Management>Authentication.
Step 3 ClickNative Authentication.
Step 4 Inthe Work pane, click the General tab.
Step 5 Inthe Default Authenticationarea, complete the followingfields:
DescriptionName
Thedefault method by whicha useris authenticated
duringremote login. This can be one of the following:
Local—Theuser account must be defined
locallyin this CiscoUCS domain.
Radius—Theuser must be definedon the
RADIUSserver specifiedfor this CiscoUCS
domain.
Tacacs—Theuser must be defined on the
TACACS+server specified for this Cisco UCS
domain.
Ldap—Theuser must be defined on the LDAP
serverspecified for thisCisco UCS domain.
None—Ifthe user account is local to this Cisco
UCSdomain, no password is required when the
userlogs in remotely.
Realmdrop-down list
Thedefault provider group to be used to authenticate
theuser duringremote login.
ProviderGroup drop-down list
Step 6 ClickSave Changes.
Role Policy for Remote Users
Bydefault, if user roles are not configured in Cisco UCS Manager read-only access is granted to all users
loggingin to Cisco UCS Manager from a remote server using the LDAP, RADIUS, or TACACS protocols.
Forsecurity reasons, it might be desirable to restrict access to those users matching an established user role
inCisco UCS Manager.
Youcan configure the role policy for remote users in the following ways:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 153
Selecting a Primary Authentication Service