Configuring Private VLANs

Creating a Primary VLAN for a Private VLAN

Ina CiscoUCS domain that is configured for highavailability, you can create a primary VLAN that is
accessibleto both fabric interconnects or to only one fabric interconnect.
Youcannot create VLANs with IDs from 3968 to 4047. This range of VLAN IDs is reserved.
VLANsin the LAN cloud and FCoEVLANs in the SAN cloudmust have different IDs. Using the same
IDfor aVLAN and an FCoE VLAN in a VSAN results in a critical fault and traffic disruption for all
vNICsand uplink ports using that VLAN. Ethernet traffic is dropped on any VLAN which has an ID that
overlapswith an FCoEVLAN ID.
Important
Procedure
Step 1 Inthe Navigation pane, clickthe LAN tab.
Step 2 Onthe LAN tab, click the LAN node.
Step 3 Inthe Work pane, click the VLANs tab.
Step 4 Onthe icon bar tothe right of thetable, click +.
Ifthe +icon isdisabled, click an entryin the tableto enable it.
Step 5 Inthe Create VLANs dialog box, complete the following fields:
DescriptionName
Fora singleVLAN, this is the VLAN name. For a range of VLANs,
thisis the prefix that the system uses for each VLAN name.
TheVLAN name is casesensitive.
Thisname can be between 1 and 32 alphanumeric characters. You
cannotuse spaces or any special characters other than - (hyphen), _
(underscore),: (colon), and . (period), and you cannot change this name
afterthe object has beensaved.
VLANName/Prefix field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 285
Configuring Private VLANs