Table 2: New Features and Significant Behavioral Changes in Cisco UCS, Release 2.0(2)
Where DocumentedDescriptionFeature
iSCSIBoot, onpage 443Addssupport for IQNpools in Cisco
UCSdomains configured for iSCSI
boot.
IQNPools
ConfiguringPorts and Port
Channels, on page 77
Enablesyou to groupall the physical
linksfrom aCiscoUCS Virtual
InterfaceCard (VIC) to an I/O Module
intoone logical link. (Requires
supportedhardware.)
AdapterPort Channels
UnifiedPorts on the6200
SeriesFabric Interconnect, on
page78
Enablesyou to usethe Configure
UnifiedPorts wizard to configure ports
ona 6296 fabric interconnect.
UnifiedPort Support for 6296
FabricInterconnect
ManagingRack-Mount
Servers, on page599
Enablesyou to renumber an integrated
rack-mountserver.
Renumberingfor Rack-Mount
Servers
ManagingBlade Servers, on
page585
ManagingRack-Mount
Servers, on page599
Addsinformation and a caution about
powerstate synchronization, including
useof the physical power button or the
resetfeature on abladeserver or an
integratedrack-mount server.
Changesto Behavior for Power
StateSynchronization
ConfiguringServer-Related
Policies, on page 381
Addssupport for newBIOS settings
thatcan be includedinBIOS policies
andconfigured from CiscoUCS
Manager.
BIOSSettings
Table 3: New Features in Cisco UCS, Release 2.0(1)
Where DocumentedDescriptionFeature
MonitoringHardware, onpage
647
Supportfor diskdrive monitoring on
certainblade servers and a specific LSI
storagecontroller firmware level.
DiskDrive Monitoring Support
ConfiguringPorts and Port
Channels, on page 77
Enablesyou to group several of the
physicallinks from a IOM to a fabric
interconnectinto one logical link for
redundancyand bandwidth sharing.
(Requiressupported hardware.)
FabricPort Channels
ManagingFirmware, onpage
183
Enablesyou toselecta bundle instead
ofa versionwhen updating firmware
usingthe CiscoUCSManager GUI.
FirmwareBundle Option
Cisco UCS Manager GUI Configuration Guide, Release 2.0
4OL-25712-04
New and Changed Information for this Release