DescriptionName
Clickthis link ifyou want to create a network control policy.CreateNetwork Control Policy
Policylink
e) Click OK.
Step 7 Ifyou chose the expert LAN connectivityoption andare configuringthis service profile for iSCSIboot, do
thefollowing:
a) Click the down arrows to expand the iSCSI vNICs bar.
b) Click Add on the icon bar of the table to open the Create iSCSI vNIC dialog box.
c) Complete the following fields to specify the identity information for the iSCSI vNIC:
DescriptionName
Thename of theiSCSI vNIC.
Thisname can be between 1 and 16 alphanumeric characters. You
cannotuse spaces or any special characters other than - (hyphen), _
(underscore),: (colon), and . (period), and you cannot change this
nameafter the object has been saved.
Namefield
TheLAN vNIC associated with this iSCSI vNIC, if any.OverlayvNIC drop-down list
TheiSCSI adapter policy associated with this iSCSI vNIC, if any.iSCSIAdapter Policy drop-down
list
Clickthis link to create a new iSCSIadapter policy that will be
availableto all iSCSIvNICs.
CreateiSCSI Adapter Policy
link
TheMAC addressassociated with thisiSCSI vNIC,if any.If the
MACaddress is not set, Cisco UCS Manager GUI displays Derived.
MACAddress field
TheMAC poolassociated with thisiSCSI vNIC,if any.MACPool field
Thevirtual LAN associated with this iSCSI vNIC. The default VLAN
isdefault.
Forthe CiscoUCS M81KRVirtual Interface Card and the
CiscoUCS M82-8PVirtual Interface Card, the VLAN that
youspecify must be the same as the native VLAN on the
overlayvNIC.
Forthe CiscoUCS M51KR-BBroadcom BCM57711
adapter,the VLAN that you specify can be any VLAN
assignedto the overlayvNIC.
Note
VLANdrop-down list
d) Click OK.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 501
Creating Service Profiles