ChooseSelect (pool defaultused bydefault) touse thedefault WWN pool.•
•Chooseone of the options listed under Manual Using OUI and then enter the WWN in the World
WideNode Name field.
Youcan specify a WWNN in the range from 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF
orfrom 50:00:00:00:00:00:00:00 to 5F:FF:FF:FF:FF:FF:FF:FF. Youcan click the here link to verify
thatthe WWNNyou specifiedis available.
•Choosea WWN pool name from the list to have a WWN assigned from the specified pool. Each
poolname is followed by two numbers in parentheses that show the number of WWNs still available
inthe pool and the totalnumber of WWNsin the pool.
b) In the vHBA 0 (Fabric A) area, complete the following fields:
•Inthe Name field, enter a unique name for the vHBA.
•Fromthe Select VSAN drop-down list, choose the name of the VSAN with which this vHBA should
beassociated.
Ifthe VSAN you need is not in the drop-down list, click the CreateVSAN link. For more information,
seeCreating a NamedVSAN, on page 335.
c) Repeat Step 7b in the vHBA 1 (Fabric B) area to create a VSAN for that vHBA.
d) Continue with Step 9.
Step 6 (Optional) If you chose the expert SAN storage option, do the following:
a) From the WWNN Assignment drop-down list, choose one of the following:
•ChooseSelect (pool defaultused bydefault) touse thedefault WWN pool.
•Chooseone of the options listed under Manual Using OUI and then enter the WWN in the World
WideNode Name field.
Youcan specify a WWNN in the range from 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF
orfrom 50:00:00:00:00:00:00:00 to 5F:FF:FF:FF:FF:FF:FF:FF. Youcan click the here link to verify
thatthe WWNNyou specifiedis available.
•Choosea WWN pool name from the list to have a WWN assigned from the specified pool. Each
poolname is followed by two numbers in parentheses that show the number of WWNs still available
inthe pool and the totalnumber of WWNsin the pool.
b) Click Add on the icon bar of the table to open the Create vHBA dialog box.
c) Complete the following fields to specify the identity information for the vHBA:
DescriptionName
Thename of thisvHBA.
Thisname can be between 1 and 16 alphanumeric characters. You
cannotuse spaces or any special characters other than - (hyphen), _
(underscore),: (colon), and . (period), and you cannot change this
nameafter the object has been saved.
Namefield
Cisco UCS Manager GUI Configuration Guide, Release 2.0
494 OL-25712-04
Creating Service Profiles