•Minor
•Warning
•Condition
•Info
e) Inthe Up and Down fields, enter the range of values that should trigger the alarm.
f) In the Alarm Triggers (Below Normal Value)field, check one or more of the following check boxes:
•Info
•Condition
•Warning
•Minor
•Major
•Critical
g) Inthe Up and Down fields, enter the range of values that should trigger the alarm.
h) ClickFinish Stage.
i) Do one of the following:
•Todefine another threshold property for the class, repeat Step 6.
•Ifyou have defined all required properties for the class, click Finish Stage.
Step 7 Inthe Create Threshold Class page of the Create Threshold Policy wizard, do one the following:
• Toconfigure another threshold class for the policy, repeat Steps 5 and 6.
• If you have configured all required threshold classes for the policy,click Finish.
Adding a Threshold Class to the Fibre Channel Port Threshold Policy
Youcannot create a Fibre Channel port threshold policy. Youcan only modify or delete the default policy.
Procedure
Step 1 Inthe Navigation pane, clickthe SAN tab.
Step 2 Onthe SAN tab, expand SAN >SAN Cloud.
Step 3 Expandthe Threshold Policies node.
Step 4 Right-clickThr-policy-default and choose the Create Threshold Class.
Step 5 Inthe Choose StatisticsClass page of the Create Threshold Class wizard, do the following:
a) Fromthe Stat Class drop-down list, choose the statistics class for which you want to configure a custom
threshold.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
672 OL-25712-04
Configuring Statistics Threshold Policies