Procedure
Step 1 Inthe Navigation pane, clickthe Servers tab.
Step 2 Onthe Servers tab, expand Servers >Policies >Organization_Name.
Step 3 Expandthe Server PoolPolicy Qualifications node.
Step 4 Choosethe policy you wantto modify.
Step 5 Inthe Work pane, choose the Qualifications tab.
Step 6 Todelete a set of qualifications:
a) In the table, choose the row that represents the set of qualifications.
b) Right-click the row and select Delete.
Step 7 ClickSave Changes.
Configuring vNIC/vHBA Placement Policies

vNIC/vHBA Placement Policies

vNIC/vHBAplacement policies are used to determine what types of vNICs or vHBAs can be assigned to the
physicaladapters on a server.Each vNIC/vHBA placement policy contains four virtual network interface
connections(vCons) that are virtual representations of the physical adapters. When avNIC/vHBA placement
policyis assigned to a service profile, and the service profile is associated with a server, the vCons in the
vNIC/vHBAplacement policy areassigned to thephysical adapters.
Ifyou do not include a vNIC/vHBA placement policy in the service profile or you use the default configuration
fora serverwith twoadapters, Cisco UCS Managerdefaults to the Allconfiguration and equallydistributes
thevNICs and vHBAs between the adapters.
Youcan use this policy to assign vNICs or vHBAs to either of the two vCons. Cisco UCS Manager uses the
vConassignment to determine how to assign the vNICs and vHBAs to the physical adapter during service
profileassociation.
•All—Allconfigured vNICs and vHBAs can be assigned to the vCon, whether they are explicitly assigned
toit, unassigned,or dynamic.
•AssignedOnly—vNICs and vHBAs must be explicitly assigned to the vCon. You can assign them
explicitlythrough the service profile or the properties of the vNIC or vHBA.
•ExcludeDynamic—Dynamic vNICs and vHBAs cannot be assigned to the vCon. The vCon can be
usedfor allstatic vNICs and vHBAs,whether they are unassignedor explicitly assigned to it.
•ExcludeUnassigned—Unassigned vNICs and vHBAs cannot be assigned to the vCon. The vCon can
beused for dynamic vNICs and vHBAs and for static vNICs and vHBAs that are explicitly assigned to
it.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 429
Configuring vNIC/vHBA Placement Policies