•Critical
g) Inthe Up and Down fields, enter the range of values that should trigger the alarm.
h) ClickFinish Stage.
i) Do one of the following:
•Todefine another threshold property for the class, repeat Step 6.
•Ifyou have defined all required properties for the class, click Finish Stage.
Step 7 Inthe Create Threshold Class page of the Create Threshold Policy wizard, do one the following:
• Toconfigure another threshold class for the policy, repeat Steps 5 and 6.
• If you have configured all required threshold classes for the policy,click Finish.
Adding a Threshold Class to the Ethernet Server Port, Chassis, and Fabric InterconnectThreshold Policy
Youcannot create an Ethernet server port, chassis, and fabric interconnect threshold policy. Youcan only
modifyor deletethe default policy.
Tip
Procedure
Step 1 Inthe Navigation pane, clickthe LAN tab.
Step 2 Inthe LAN tab, expandLAN >Internal LAN.
Step 3 Expandthe Threshold Policies node.
Step 4 Right-clickThr-policy-default and choose the Create Threshold Class.
Step 5 Inthe Choose StatisticsClass page of the Create Threshold Class wizard, do the following:
a) From the Stat Class drop-down list, choose the statistics class for which you want to configure a custom
threshold.
b) ClickNext.
Step 6 Inthe Threshold Definitions page, do the following:
a) Click Add.
TheCreate Threshold Definition dialog box opens.
b) Fromthe Property Type field, choose the threshold property that you want to define for the class.
c) In the Normal Valuefield, enter the desired value for the property type.
d) Inthe Alarm Triggers(Above Normal Value)field, check one or more ofthe following check boxes:
•Critical
•Major
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 671
Configuring Statistics Threshold Policies