Step 4 Choosethe rack-mount server thatyou wantto renumber.
Step 5 Onthe Equipment tab, click the Rack-Mounts node.
Step 6 Inthe Work pane, click the Decommissioned tab.
Step 7 Onthe row for each rack-mount server that you want to renumber, do the following:
a) Double-click in the ID field, and enter the new number that you want to assign to the rack-mount server.
b) In the Recommission column, check the check box.
c) Click Save Changes
Step 8 Ifthe CiscoUCS Manager GUI displaysa confirmationdialog box, click Yes.
Step 9 (Optional) Monitor the progress of theserver recommission and discovery on the FSM tab for the server.
Removing a Non-Existent Rack-Mount Server from the Configuration Database
Performthe following procedure if you physically removed the server hardware without first decommissioning
theserver. You cannot perform this procedure if the server is physically present.
Procedure
Step 1 Inthe Navigation pane, clickthe Equipment tab.
Step 2 Onthe Equipment tab, expand Equipment >Rack Mounts >Servers.
Step 3 Choosethe server that you want to remove from the configuration database.
Step 4 Inthe Work pane, click the General tab.
Step 5 Inthe Actions area, clickServer Maintenance.
Step 6 Inthe Maintenance dialog box, do the following:
a) Click Remove.
b) Click OK.
CiscoUCS Manager removes all data about the server from its configuration database. The server slot is now
availablefor you to insert new server hardware.
Turning the Locator LED for a Rack-Mount Server On and Off
Procedure
Step 1 Inthe Navigation pane, clickthe Equipment tab.
Step 2 Onthe Equipment tab, expand Equipment >Rack Mounts >Servers.
Step 3 Choosethe server for which you want to turn the locator LED on or off.
Step 4 Inthe Work pane, click the General tab.
Step 5 Inthe Actions area, clickone of thefollowing:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 607
Removing a Non-Existent Rack-Mount Server from the Configuration Database