Cisco Systems OL-25712-04 - page 709

b) ClickNext.
Step 6 Inthe Threshold Definitions page, do the following:
a) Click Add.
TheCreate Threshold Definition dialog box opens.
b) Fromthe Property Type field, choose the threshold property that you want to define for the class.
c) In the Normal Valuefield, enter the desired value for the property type.
d) Inthe Alarm Triggers(Above Normal Value)field, check one or more ofthe following check boxes:
•Critical
•Major
•Minor
•Warning
•Condition
•Info
e) In the Up and Down fields, enter the range of values that should trigger the alarm.
f) In the Alarm Triggers (Below Normal Value) field, check one or more of the following check boxes:
•Info
•Condition
•Warning
•Minor
•Major
•Critical
g) Inthe Up and Down fields, enter the range of values that should trigger the alarm.
h) ClickFinish Stage.
i) Do one of the following:
•Todefine another threshold property for the class, repeat Step 6.
•Ifyou have defined all required properties for the class, click Finish Stage.
Step 7 Inthe Create Threshold Class page of the Create Threshold Policy wizard, do one the following:
• Toconfigure another threshold class for the policy, repeat Steps 5 and 6.
• If you have configured all required threshold classes for the policy,click Finish.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 673
Configuring Statistics Threshold Policies