DescriptionName
Movesthe selectedvNIC or VHBA to a higher
priorityin the list.
MoveUp button
Movesthe selectedvNIC or vHBA to a lower
priorityin the list.
MoveDown button
Deletesthe selected vNIC or vHBA.Deletebutton
Returnsall vNICs and vHBAsto theiroriginal
order.
Reorderbutton
Enablesyou to modify the currently-selected vNIC
orvHBA.
Youcan change any options for the vNIC
orvHBA exceptits name.
Note
Modifybutton
b) Continue with Step 5.
Step 3 (Optional) If you chose Specify Manually, do thefollowing:
a) On the appropriate tab in the vNIC/vHBA table, click a vNIC or vHBA.
b) In the Virtual Host Interface table, click a vCON row and if necessary,choose one of the following
valuesfrom the SelectionPreference column:
•All—Allconfigured vNICs and vHBAs can be assigned to the vCon, whether they are explicitly
assignedto it, unassigned,or dynamic.
•AssignedOnly—vNICs and vHBAs must be explicitly assigned to the vCon. You can assign them
explicitlythrough the service profile or the properties of the vNIC or vHBA.
•ExcludeDynamic—Dynamic vNICs and vHBAs cannot be assigned to the vCon. The vCon can be
usedfor allstatic vNICs and vHBAs,whether they areunassigned or explicitlyassigned to it.
•ExcludeUnassigned—Unassigned vNICs and vHBAs cannot be assigned to the vCon. The vCon
canbe used for dynamic vNICs and vHBAs and for static vNICs and vHBAs that are explicitly
assignedto it.
c) Click Assign.
Ifyou need to undo an assignment, click Remove.
d) Repeat Steps a through c until you have assigned all vNICs and vHBAs.
e) When you have specified all vNIC and vHBA placements, continue with Step 5.
Step 4 Ifyou clickedCreate Placement Policy, do the following in the Create Placement Policy dialog box:
a) In the Name field, enter a unique name for the placement policy.
Thisname can be between 1 and 16 alphanumeric characters. You cannot use spaces or any special
charactersother than - (hyphen), _ (underscore), : (colon), and . (period), and you cannot change this name
afterthe object has beensaved.
b) Inthe Selection Preference column for each Virtual Slot, choose one of the following from the drop-down
list:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 503
Creating Service Profiles