e) Repeatsteps b through d to configure additional iSCSI vNICs.
Step 8 ClickNext.
What to Do Next
CompletePage 4: Setting the vNIC/vHBAPlacement, onpage 502.
Page 4: Setting the vNIC/vHBA Placement
Thisprocedure directly follows Page 3: Configuring the Networking Options, on page 496. It describes how
toset the vNIC and vHBAplacement options on the vNIC/vHBA Placement page of the Create Service
Profile(expert) wizard.
Procedure
Step 1 Fromthe Select Placement drop-down list,choose one of the following:
DescriptionOption
Specifiesthat Cisco UCSManager determines the vNIC/vHBA placement for
theserver associated with the service profile. The placement is determined by
theorder set in the PCI Ordertable.
Ifyou are configuring this service profile/template for iSCSI boot, choose this
option.
Ifyou areconfiguring this service profile for iSCSI boot, continue with Step 5.
Forall configurations,continue with Step 2.
LetSystem Perform
Placement
Enablesyou to do the following:
• Explicitly assign the vNICs and vHBAs associated with this service profile
toa virtualnetwork interface connection (vCon).
• Configure the types of vNICs and vHBAs that can be assigned to a vCon,
eithermanually or througha vNIC/vHBA placement policy.
Continuewith Step 3.
SpecifyManually
Assignsan existing vNIC/vHBAplacement policy to the service profile. If you
choosethis option, CiscoUCS Manager displays the details of the policy.
Ifyou donot want use any of the existing policies, but instead want to create a
policythat all service profiles can access, click Create Placement Policy and
continuewith Step 4. Otherwise,continue with Step 5.
vNIC/vHBAPlacement
Profiles Placement
ProfileName
Step 2 (Optional) If youchose Let System Perform Placement, do the following:
a) Useone or moreof the following buttons to adjust the order of the vNICs and vHBAs:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
502 OL-25712-04
Creating Service Profiles