DescriptionName
Checkthis check box if you want to use a template to create the
vHBA.Cisco UCS ManagerGUI displays the vHBATemplate
drop-downlist fromwhich youcan selectthe appropriate template,
andthe Adapter PerformanceProfile area from which you can
selectan adapter profile.
Youcan only select this option if one or more SAN
connectivitytemplates exist in thesystem.
Note
UseSAN Connectivity Template
checkbox
Clickthis link ifyou wantto createa vHBAtemplate.CreatevHBA Template link
Ifyou want to:
•Usethe default WWPN pool, leave this field set to Select (pool
defaultused by default).
•Usethe WWPN assigned to the server by the manufacturer,
selectHardware Default.
•Aspecific WWPN, select20:00:00:25:B5:00:00:00,
20:XX:XX:XX:XX:XX:XX:XX,or
5X:XX:XX:XX:XX:XX:XX:XXand enter the WWPN in the
WWPNfield. To verify that this WWPN is available, click the
correspondinglink.
•AWWPN from a pool, select the pool name from the list. Each
poolname is followed by a pair of numbers in parentheses. The
firstnumber is the number of available WWN addresses in the
pooland the second is the total number of WWPN addresses in
thepool.
Tocreate a new WWPN pool, click Create WWPN Pool.
WWPNAssignment drop-down
list
d) In the VSAN area, complete the following fields:
DescriptionName
Thefabric interconnectassociated with the component.FabricID field
TheVSAN with which this vHBA isassociated.SelectVSAN drop-down list box
Clickthis link ifyou wantto createa VSAN.CreateVSAN link
Thepin group with which this vHBA is associated.PinGroup drop-down list box
Clickthis link if you want to create a pin group.Create SAN Pin Group link
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 495
Creating Service Profiles