Thedetails of the selected backup operation display in the Properties area. If the backup operation is in a
disabledstate, the fields are dimmed.
Step 6 Inthe Admin State field,click the enabledradio button.
Step 7 Modifythe appropriatefields.
Youdo not have to enter the password unless you want to run the backup operation immediately.
Step 8 (Optional) If you do not want to run the backup operation immediately, click the disabled radio button in
theAdmin State field.
Step 9 ClickOK.

Deleting One or More Backup Operations

Procedure
Step 1 Inthe Navigation pane, clickthe Admin tab.
Step 2 Clickthe All node.
Step 3 Inthe Work pane, click the General tab.
Step 4 Inthe Actions area, clickBackup.
Step 5 Inthe Backup Operationstable of the BackupConfiguration dialog box, clickthe backupoperations that
youwant to delete.
Youcannot click a backup operation in the table if the admin state of the operation is set to Enabled.Tip
Step 6 Clickthe Delete icon in the icon bar of the Backup Operations table.
Step 7 Ifthe CiscoUCS Manager GUI displaysa confirmationdialog box, click Yes.
Step 8 Inthe Backup Configurationdialog box, clickone of the following:
DescriptionOption
Deletesthe selected backup operations without closing the dialog box.
Apply
Deletesthe selected backup operations and closes the dialog box.
OK
Import Operations

Creating an Import Operation

Youcannot import a Full State configuration file. You can import any of the following configuration files:
• All configuration
• System configuration
Cisco UCS Manager GUI Configuration Guide, Release 2.0
626 OL-25712-04
Import Operations