Hybrid Display

Foreach chassisin a CiscoUCS domain, Cisco UCS ManagerGUI providesa hybrid display that includes
bothphysical components and connections between the chassis and the fabric interconnects.
Thistab displays detailed information about the connections between the selected chassis and the fabric
interconnects.It has an icon for the following:
• Each fabric interconnect in the system
• The I/O module (IOM) in the selected component, which is shown as an independent unit to make the
connectionpaths easier to see
• The selected chassis showing the servers and PSUs
Thelines between the icons represent the connections between the following:
• DCE interface on each server and the associated server port on the IOM. These connections are created
byCisco and cannot be changed.
• Server port on the IOM and the associated port on the fabric interconnect. Youcan change these
connectionsif desired.
Youcan mouse over the icons and lines to view tooltips identifying each component or connection, and you
candouble-click any componentto viewproperties for thatcomponent.
Ifthere is a fault associated with the component or any of its subcomponents, Cisco UCS Manager GUI
displaysa fault icon on top of the appropriate component. If there are multiple fault messages, Cisco UCS
ManagerGUI displays the icon associated with the most serious fault message in the system.
Logging in to Cisco UCS Manager GUI through HTTPS
Thedefault HTTPS web linkfor CiscoUCS ManagerGUI ishttps://UCSManager_IP, where
UCSManager_IPrepresents the IP address assigned to Cisco UCS Manager. This IP address can be one of
thefollowing:
• Cluster configuration: UCSManager_IP represents the virtual or cluster IP address assigned to Cisco
UCSManager. Do not use the IP addresses assigned to the management port on the fabric interconnects.
• Standalone configuration: UCSManager_IP represents the IP address for the management port on the
fabricinterconnect.
Procedure
Step 1 Inyour web browser, type the Cisco UCS Manager GUI web link or select the bookmark in your browser.
Step 2 Ifa Security Alert dialogbox appears,click Yes to accept the security certificate and continue.
Step 3 Inthe CiscoUCS Managerlaunch page, click Launch UCS Manager.
Dependingupon the web browser you use to log in, you may be prompted to download or save the .JNLP
file.
Step 4 IfCisco UCS Manager displays a pre-login banner, review the message and click OK to close the dialog box.
Step 5 Ifa Security dialog box displays, do the following:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 53
Logging in to Cisco UCS Manager GUI through HTTPS